jump to navigation

Where are my CALS? June 13, 2009

Posted by Gomez in IT, Microsoft, Network Services.
Tags: , , ,
1 comment so far

For all my fellow Small Business Server users, this week I was greeted with an issue with one of my client’s informing me that they are not able to access the mapped network drives “Connection to resource has exceeded maximum connections” After extensive searching in Event Viewer > System logs, I came across the following entry;

Event Type:        Error
Event Source:    SBCore
Event Category:     None
Event ID:              1023
Date:                     6/11/2009
Time:                     7:08:27 PM
User:                     N/A
Computer:          XXXXXX
Description:
The license store for the client access licenses is not valid. Only the minimum number of client access licenses will be available until a valid license store is restored. For more information, see Help in the Licensing snap-in.

 Open Server Management > Licenses, found that  installed CALs (50 Client access licenses) disappeared leaving only the default “5”. 

There are three main methods for restoring the License Store.

Method 1: If you had previously exported the license store after entering the CALS and activating them, you can simply restore that file.

Method 2: If you have the actual CAL codes you can re-enter and activate the CALS.

Method 3: If you have a backup of your system drive you can locate the file licstr.cpa which is located in %systemroot%/system32  folder. Simply replace this file on your affected system with the previously backed up licstr.cpa.  (This method was the one that worked in my situation)

Now after you have restored the licstr.cpa file in its original location, be sure to restart the license logging service.

Word of caution for those who have not experience this issue, take a backup of your license store!

Advertisements

Small Business Server 2003 POP3 Connector April 19, 2009

Posted by Gomez in E-Mail, IT, Microsoft.
Tags: , , , , ,
1 comment so far

Small Business Server 2003 users that use the POP3  Connector Manager and are affected by that annoying 15 minutes download interval, finally there is hope, here is a registry tweak to drop the interval from 15 minutes to 5 minutes;

FIRST. Take a backup of your registry

1. Open Regedit
2. Navigate to HKEY_LOCAL_MACHINE/SOFTWARE/Micro­ soft/SmallBusinessServer/Network/P­OP3 Connector
3. Create a new “DWORD value” and type “ScheduleAccelerator” as the entry name
4. Select the DWORD and on the edit menu click modify, in the value box, type 3 and ensure the Decimal Radio button is clicked on the right.

(To determine the polling interval, the value that is configured on the “Scheduling” tab in the GUI is divided by the value that you type for the ScheduleAccelerator entry, example, if a 15 minute interval is specified in the GUI and you set the value of the ScheduleAccelerator entry to 3, the connector will poll ever five minutes, If you make it too short there can be problems with the POP3 connector starting a download before the previous download has started, it seems to work well with 5minutes)

5. Exit Regedit