Setting up onboard Dialout v.92 modem on cisco 1811

I’ve trolled the internet looking for ways to configure the v92 modem on a cisco 1811, and have managed to paste together pieces to make a dialup connection from the router, please note this configuration will not work with the aux port.

interface Async1
no ip address
ip nat outside
ip virtual-reassembly
encapsulation ppp
no ip route-cache cef
no ip route-cache
dialer in-band
dialer pool-member 1
dialer-group 1
async mode interactive

!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
no ip route-cache cef
no ip route-cache
dialer pool 1
dialer remote-name ***ISP NAME***
dialer idle-timeout 2000
dialer string ***NUMBER***
dialer hold-queue 10
dialer-group 1
no peer default ip address
ppp authentication pap chap callin
ppp chap hostname ***USERNAME***
ppp chap password 0 ***PASSWORD***
!

access-list 123 permit ip any any — Modify this to mark interesting traffic to bring up the Dialup Connection.
dialer-list 1 protocol ip list 123